Temperature : 0~40C
Application : Agricultural Irrigation, Fish water, river water
Maximum depth of water : 5m
Impeller : 6″:centrifugal type,8″,10″: axial flow type, 12″: mix flow type
Seal : Dual mechanical seal
Bearing : Deep groove ball bearing
Housing : Stainless Steel
Top cover : Cast Iron
Cover : Cast Iron
Impeller : Bronze
Seal housing : Casat Iron
Bearing housing : Cast Iron
Type : Dry-type
Pole : 4P
Insulation : B class
Frequency : 50Hz/60Hz
Frame : Stainless Steel
Cable : H 07RN-F
This pump and electric motor are assembled properly and delivered by this factory, as long as this pump is placed horizontally to be connected with in and out pipe as well as switched on the lead wire of power supply. (Notice : the steering of motor should be consistent with the arrow direction of running pump)
The pump body is made by rolling of fluoroplastics, and its stiffneess os worse than the one of metal, therefore, the pipeline can’t be pressed on the pump body. The suction pipeline should short and straight as much as possible, if the pipeline at the outlet is too heavy, the support bearing should be added additionally to prolong the life.
All junctions must be sealed to prevent that air and liquid leakage affects the service performance of pump.
Main Features:
Continuous low pulsation conveying.
Rectangular hopper inlet, hopper size can be adjusted according to actual application.
The connecting rod is equipped with a spiral horizontal propulsion device to prevent material accumulation at the pump inlet.
Maximum inlet pressure : 2bar
Maximum flow : 2040L/h
Maximum ambient temperature : +40˚C
Maximum outlet pressure : 12bar
The suction-lifting elevation may reach 3m water column
Adjustment range : 30%-100%, steady-state accuracy -+1%
Maximum inlet pressure : 2bar
Maximum flow : 2040L/h
Maximum ambient temperature : +40˚C
Maximum outlet pressure : 12bar
The suction-lifting elevation may reach 3m water column
Adjustment range : 30%-100%, steady-state accuracy -+1%
Main performance parameters
Maximum flow rate of signal head: 2400L/h
Double-headed maximum flow rate: 4800L/h
Maximum discharge pressure: 8 bar
Adjustment range: 30%-100%
steady-state accuracy: ±1%
The suction lifting height can reach to 2.5m
Maximum ambient temperature: +40°C
