Showing 33–43 of 43 results
Product Class
Available for both IEC and Input Shaft
Range of ratio is from 1/5 to 1/3600.
Range of horse power is from 1/4HP up to 75HP.
Medium Carbon Steel (S45C) worm shaft with harden heat treatment and grinding on threads.
Aluminum Bronze (ALBC3) wheel for a better durability.
Robust housing made in Grey Iron (FC20)
Removable base for universal mounting gearboxes.
Product Class
Available for both IEC and Input Shaft
Range of ratio is from 1/5 to 1/3600.
Range of horse power is from 1/4HP up to 75HP.
Medium Carbon Steel (S45C) worm shaft with harden heat treatment and grinding on threads.
Aluminum Bronze (ALBC3) wheel for a better durability.
Robust housing made in Grey Iron (FC20)
Removable base for universal mounting gearboxes.
Product Class
Available for both IEC and Input Shaft
Range of ratio is from 1/5 to 1/3600.
Range of horse power is from 1/4HP up to 75HP.
Medium Carbon Steel (S45C) worm shaft with harden heat treatment and grinding on threads.
Aluminum Bronze (ALBC3) wheel for a better durability.
Robust housing made in Grey Iron (FC20)
Removable base for universal mounting gearboxes.
Product Class
Available for both IEC and Input Shaft
Range of ratio is from 1/5 to 1/3600.
Range of horse power is from 1/4HP up to 75HP.
Medium Carbon Steel (S45C) worm shaft with harden heat treatment and grinding on threads.
Aluminum Bronze (ALBC3) wheel for a better durability.
Robust housing made in Grey Iron (FC20)
Removable base for universal mounting gearboxes.
Product Class
Available for both IEC and Input Shaft
Range of ratio is from 1/5 to 1/3600.
Range of horse power is from 1/4HP up to 75HP.
Medium Carbon Steel (S45C) worm shaft with harden heat treatment and grinding on threads.
Aluminum Bronze (ALBC3) wheel for a better durability.
Robust housing made in Grey Iron (FC20)
Removable base for universal mounting gearboxes.
Product Class
Available for both IEC and Input Shaft
Range of ratio is from 1/5 to 1/3600.
Range of horse power is from 1/4HP up to 75HP.
Medium Carbon Steel (S45C) worm shaft with harden heat treatment and grinding on threads.
Aluminum Bronze (ALBC3) wheel for a better durability.
Robust housing made in Grey Iron (FC20)
Removable base for universal mounting gearboxes.
Product Class :
Available for both IEC and Input Shaft
Range of ratio is from 1/5 to 1/3600.
Range of horse power is from 1/4HP up to 75HP.
Medium Carbon Steel (S45C) worm shaft with harden heat treatment and grinding on threads.
Aluminum Bronze (ALBC3) wheel for a better durability.
Robust housing made in Grey Iron (FC20)
Removable base for universal mounting gearboxes.
Working Principle
Input shaft is equipped with a double-eccentric bushing with dislocation of 180°C, and eccentric bushing is equipped with two roller bearing to form H structure. Center hole of two cycloidal wheels is the roller path of tumbler bearing on eccentric bushing, and a group of circular pinwheels are engaged in cycloidal wheel and pin wheel, so that inner gearing reducer structure with small teeth difference takes shape, ( pin gear is equipped with pin gear set in the reducer with small speed ratio to reduce friction)
When input shaft moves a circle together with eccentric bushing, due to the characteristics of flank curve of cycloidal wheel and the restraint of gear pin of pin wheel, cycloidal wheel starts plane motion with revolution and autorotation. When input shaft moves forward a circle, so does eccentric bushing. And cycloidal wheels get through a teeth difference in the opposite direction, so that speed is reduced. By means of W output structure, low-speed autorotation motion of cycloidal wheel is transferred to output shaft through pin roll, so lower output speed is achieved.
Powerful overload capacity, strong resistance to impact, small moment of inertia, and applicable to occasions with frequent stars and positive and negative rotating.
1. High reduction ratio and efficiency
Single-stage transmission can produce the reduction ration of 1:87 and over 90% efficiency. Multi-stage transmission will offer higher reduction ratio.
2. Compact structure and small volume
The planetary transmission principle, input shaft and output shaft are at the same axis, so it has compact structure and small volume.
3. Stable operation and low noise
Cycloidal gear pins have more engagement, bigger overlap coefficient and mechanism of stable machine parts
4. Reliable operation and long service life
Major parts are manufactured with bearing steel, so they have excellent mechanical performance. The adoption of rolling friction makes them durable in use.
Powerful overload capacity, strong resistance to impact, small moment of inertia, and applicable to occasions with frequent stars and positive and negative rotating.
1. High reduction ratio and efficiency
Single-stage transmission can produce the reduction ration of 1:87 and over 90% efficiency. Multi-stage transmission will offer higher reduction ratio.
2. Compact structure and small volume
The planetary transmission principle, input shaft and output shaft are at the same axis, so it has compact structure and small volume.
3. Stable operation and low noise
Cycloidal gear pins have more engagement, bigger overlap coefficient and mechanism of stable machine parts
4. Reliable operation and long service life
Major parts are manufactured with bearing steel, so they have excellent mechanical performance. The adoption of rolling friction makes them durable in use.
Ratio : 1/5278 – 1/6800
Output Speed : 0.018 ~ 0.236rpm
Power : 0.37kW – 7.5kW
Nm : 130000Nm
Gear Type : Helical
